top of page

TOYOTA LANDCRUISER
J7 LC76 SERIES
 

09/2022 on

3660KG GVM

TOYOTA LANDCRUISER J7 LC76 SERIES
3660KG GVM UPGRADE

09/2022 ON

The Lovells 3660kg GVM Upgrade Kit will suit any vehicle owner with a need to carry additional loads of up to 150kg over the original GVM rating: this includes Government departments, mining companies, farmers, tradesmen, large and small businesses, even individuals. 

LOVELLS RATINGS
P/N TOYKIT057-GVM-J7

LOVELLS Front Axle                    1480kg

__________________________

 

LOVELLS Rear Axle                     2360kg

__________________________

 

LOVELLS GVM                            3660kg

__________________________

 

LOVELLS Towing Capacity          3500kg

__________________________

 

LOVELLS GCM                            7160kg

__________________________

ORIGINAL EQUIPMENT
RATING

OE GVM                                     3510kg

__________________________

 

OE Towing Capacity                  3500kg

__________________________

 

OE GCM                                    6560kg

__________________________

KIT COMPONENTS

  • 2 x Lovells heavy duty front coil springs.

  • 2 x Lovells heavy duty rear leaf springs.

  • 2 x Lovells front gas legend twin tube shock absorbers.

  • 2 x Lovells rear gas legend twin tube shock absorbers.

  • 3 x Lovells urethane bush kits to suit leaf spring eyes and shackles.

  • 4 x Lovells hi-tensile U-bolts.

  • 2 x Lovells greasable shackles.

  • 2 x Lovells greasable pins.

  • 2 x Lovells mudflaps.

  • 1x Federal SVI (Secure Vehicle Identification Placard) with revised GVM and upload onto the Federal RAV System for Pre-Registration vehicles only.

DOWNLOAD PDF

New vehicles must be fitted prior to first registration for Second Stage Manufacture/Federal Compliance Plate Approval.

Vehicles which are already registered can be fitted with a GVM kit under individual State or Territory Compliance - Please contact Lovells for further detail as each state legislation differs with compliance procedures and GCM revision acceptance.

​

Only Lovells Automotive Systems Authorised fitters are approved to fit the GVM kit and Lovells endorsed engineering signatories are approved to inspect State Compliance modified vehicles.

​

Please contact us for your nearest Authorised Fitter.

LOVELLS GVM UPGRADE KIT
HOW TO FIT

LovellsLogo3d2.png

LOVELLS GVM UPGRADE KIT
SPECIAL CONDITIONS

When fitting a Lovells GVM kit to these vehicles, the vehicle must have a minimum Tyre Load Index of 114 and Speed Rating of "L" to remain compliant.

LovellsLogo3d2.png

LOVELLS GVM UPGRADE KIT
COMPLIANCE OPTIONS

State Compliance - Post Registration

Vehicles which are already registered cannot be fitted under federal approval. In some states of Australia, Lovells can offer State compliance for vehicles already registered in accordance to State Legislation and approved by a Lovells endorsed engineering signatory.

​

The Lovells GVM upgrade kit has been approved by the Department of Infrastructure, Transport, Regional Development and Communications (compliance plate approval no. 061197) and will help to keep your vehicle legal.

​

Gross Combination Mass GCM increases may not be available in all States.

​

For more information please contact your nearest Lovells GVM Installer.

HOW TO
CONDITIONS
COMPLIANCE
bottom of page